What are you looking for?
What is the working principle of FRP purification towers? In fact, it is very simple. When water droplets come into contact with air, on the one hand, due to the direct heat transfer between air and air, on the other hand, due to the pressure difference between the surface of water vapor and air, evaporation occurs under the action of pressure, bringing it to the cooling tower that currently takes away the latent heat of evaporation and takes away the heat in the water, that is, evaporation heat transfer, so as to achieve the purpose of cooling.
①. The whole process adopts dry direct degradation, and realizes the treatment of high-flow rate and large-flow organic waste gas at normal temperature and pressure, and has a high degradation efficiency.
②. In addition to the input of ordinary city electricity, no adsorbent and combustion-supporting materials are required, and truly realize no secondary pollution and harmless emission of degradation products.
③. The low-temperature plasma pulse power supply technology used has greatly improved the efficiency of activating, cracking and ionizing waste gas.
④. The use of high-quality nano-silver and metal nickel foam titanium dioxide ultraviolet photocatalytic technology can degrade a variety of organic matter in waste gas and improve the purification quality.
⑤. The entire unit fully considers the safety performance requirements of the actual operating environment of the equipment for combustion, explosion, etc. in terms of materials, processes and structural design.
⑥. The entire equipment realizes modular combination, with a high degree of automation, simple process and very convenient operation.
1. The solution concentration in the liquid storage tank should be kept within the range of 2-6%.
2. When the concentration is lower than 2%, the solution must be added.
3. When the acid, alkali and salt concentration in the liquid storage tank is higher than 20% or the actual use situation, the solution should be replaced regularly.
The FRP purification tower is a cylindrical structure. The whole tower consists of three parts, namely liquid storage, air intake, spraying, dehydration and air outlet. The outlet pipe is connected and the plastic balls are installed in the spray. The acid mist purification tower is made of fiberglass in one piece, with a compact structure, corrosion resistance, high temperature resistance and smooth appearance; the water removal part is separated to produce water and gas separation;
Water spraying part: high-pressure water spraying produces mist, divided into upper and lower sections to expand contact treatment and improve function;
Filling: sea urchin type or crown type, PP one-piece molding requires anti-overflow discharge pipe;
Observation window: 5mm thick transparent acrylic plate;
Automatic water adding device: float liquid level automatic control type
Yunbai Environment focuses on the research and development, production and sales of fiberglass chimneys, and looks forward to your call for consultation. Free service hotline: 4000-118-339
