What are you looking for?
How do FRP chimneys protect the environment? The ultimate goal of this process is to filter out harmful gases and then discharge the gases that meet the emission standards stipulated by the environmental protection department into the atmosphere.
So, what is the specific purpose of FRP chimneys to achieve this air purification? The following Yunbai editor will introduce to you:
The working principle of FRP chimneys is to separate the pollutants in the gas and convert them into harmless substances to achieve the purpose of purifying the gas. It belongs to the differential contact countercurrent type, and the filler in the tower body is the basic component of the gas-liquid two-phase contact. It can provide a large enough surface area without causing too much resistance to the gas flow. The absorbent is the main media for treating waste gas. Its properties and concentration are selected according to the properties of different waste gases. The consumption of the unit gas is determined by calculating the ratio of the molar flow rate of the absorbent to the inert gas. The exhaust gas is sucked in by the air duct and passes through the packing layer from bottom to top: the circulating absorbent passes through the liquid distributor from the top of the tower, is evenly sprayed on the packing layer, flows downward along the surface of the packing layer, and enters the circulating water tank. As the rising airflow and the descending absorbent are constantly in contact in the packing, the fluid concentration in the rising airflow becomes lower and lower, and reaches the emission requirements when it reaches the top of the tower.
The key points of knowledge about FRP chimneys are mentioned here first. I hope it will be helpful to everyone's work. If you want to know more information, please pay attention to the company website: http://www.szhuading.com
